FPGA

FPGA | Chipomi Store | Chipomi

1/1

Article: fpga_128

ALINX AXW22: Xilinx Zynq UltraScale+ RFSoC XCZU47DR FPGA Development Board

1 000 000 ₽

In stock: 19 left

Description

AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform

AMD Zynq™ UltraScale+™ RFSoC Gen 3:

Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz
Dual-core Arm Cortex-R5F MPCore up to 533 MHz
16nm FinFET+ Programmable Logic
Soft-decision forward error-correction cores (SD-FEC)

Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html

AXW22 is a Compact SDR board with XCZU47DR FPGA, equipped with 2×14-bit 5GSPS RF-ADCs, 2×14-bit 9.85GSPS RF-DACs, 6GB DDR4, 1× QSFP+, 1× SFP+, GPS, 4× M.2, 2T2R RF SMA ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Wideband.

Ideal for:

5G and LTE Wireless
Remote-PHY for Cable Access DOCSIS 3.1
Phased Array Radar/Digital Array RADAR
Test & Measurement
Satellite Communications

This is a single board design. Also check out our AXW49 with XCZU49DR.

FPGA Specification (RFSoc)

FPGA	XCZU47DR-2FFVE1156I
14-bit RF-ADC w/DDC	8x, Max Rate (GSPS) 5.0
14-bit RF-DAC w/DUC	8x, Max Rate (GSPS) 9.85
Number of DDCs per RF-ADC	1
RF input Freq max. GHz	6
Decimation / Interpolation	1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x
Processors	4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz
High-Speed Connectivity	4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII
General Connectivity	214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters
GTY	16x
Chip Level	Industrial Grade
Speed Grade	-2
Working Temperature	-40℃~85℃
System Logic Cells (K)	930
CLB LUTs (K)	425
Max. Dist. RAM (Mb)	13.0
Total Block RAM (Mb)	38.0
UltraRAM (Mb)	22.5
DSP Slices	4,272
1.8V High-Performance (HP) I/Os	104
3.3V High-Density (HD) I/O	48

Board Features

DDR4	PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 2x 1GB DDR4, total 2GB, 32bit Bus, Data Rate 2400Mbps
QSPI FLASH	2x 1024Mbit, for user data storage
40G QSFP+	1x
10G SFP+	1x
GPS	1x NEO-M8N
RS232	1x
GPIO	36x via 1x 40-pin 2.0mm socket (J8)
SPI / GPIO	1x SPI, 1x GPIO via J30J connector (J9)
JTAG	1x 14-pin 2.0mm Standard JTAG, or 1x Type-C (J3) via FT4232HL, for Programs Debug and Download
Ethernet Interface	1x 10/100/1000M Ethernet with RJ45 for data exchange
Active Crystal Oscillator	1x Single-ended 33.3333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY
EEPROM	1x M24C08-RDW6TP 8Kb with IIC
SD Card Slot	1 micro SD Card Slot, support SD Mode and SPI Mode
Real Time Clock	1x Built-in RTC
LEDs	4x STATUS, POWER, 8x User
Push-Buttons	2x