Description
AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform
AMD Zynq™ UltraScale+™ RFSoC Gen 3:
Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz
Dual-core Arm Cortex-R5F MPCore up to 533 MHz
16nm FinFET+ Programmable Logic
Soft-decision forward error-correction cores (SD-FEC)
Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html
AXW22 is a Compact SDR board with XCZU47DR FPGA, equipped with 2×14-bit 5GSPS RF-ADCs, 2×14-bit 9.85GSPS RF-DACs, 6GB DDR4, 1× QSFP+, 1× SFP+, GPS, 4× M.2, 2T2R RF SMA ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Wideband.
Ideal for:
5G and LTE Wireless
Remote-PHY for Cable Access DOCSIS 3.1
Phased Array Radar/Digital Array RADAR
Test & Measurement
Satellite Communications
This is a single board design. Also check out our AXW49 with XCZU49DR.
FPGA Specification (RFSoc)
FPGA
XCZU47DR-2FFVE1156I
14-bit RF-ADC w/DDC
8x, Max Rate (GSPS) 5.0
14-bit RF-DAC w/DUC
8x, Max Rate (GSPS) 9.85
Number of DDCs per RF-ADC
1
RF input Freq max. GHz
6
Decimation / Interpolation
1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x
Processors
4x ARM Cortex-A53, 1.333GHz
2x ARM Cortex-R5F, 533MHz
High-Speed Connectivity
4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII
General Connectivity
214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters
GTY
16x
Chip Level
Industrial Grade
Speed Grade
-2
Working Temperature
-40℃~85℃
System Logic Cells (K)
930
CLB LUTs (K)
425
Max. Dist. RAM (Mb)
13.0
Total Block RAM (Mb)
38.0
UltraRAM (Mb)
22.5
DSP Slices
4,272
1.8V High-Performance (HP) I/Os
104
3.3V High-Density (HD) I/O
48
Board Features
DDR4
PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps
PL: 2x 1GB DDR4, total 2GB, 32bit Bus, Data Rate 2400Mbps
QSPI FLASH
2x 1024Mbit, for user data storage
40G QSFP+
1x
10G SFP+
1x
GPS
1x NEO-M8N
RS232
1x
GPIO
36x via 1x 40-pin 2.0mm socket (J8)
SPI / GPIO
1x SPI, 1x GPIO via J30J connector (J9)
JTAG
1x 14-pin 2.0mm Standard JTAG, or
1x Type-C (J3) via FT4232HL, for Programs Debug and Download
Ethernet Interface
1x 10/100/1000M Ethernet with RJ45 for data exchange
Active Crystal Oscillator
1x Single-ended 33.3333MHz provide PS Clock
1x LMK04828 for the PL Logic, DDR Reference, GTY
EEPROM
1x M24C08-RDW6TP 8Kb with IIC
SD Card Slot
1 micro SD Card Slot, support SD Mode and SPI Mode
Real Time Clock
1x Built-in RTC
LEDs
4x STATUS, POWER, 8x User
Push-Buttons
2x
Power Supply
Voltage Input: +12 V DC, Barrel plug 2.5 x 5.5 mm
Current Input: Max. Current 8.5 A
What's Included
FPGA Board
1
DC Fan (installed)
2
SMA cable
4x
12V Power Adapter
1 set
SD Card
1x 32GB
SD Card Reader
1
Dimensions
Dimension
180.00 mm x 135.00 mm
PCB
Independent GND and Power Layers
Resources & Downloads
AXW22 User Manual (PDF, Simplified Chinese)
Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.
